Installing window screens requires the right steps to ensure everything is done accordingly. If you want to install window screens, you need to make sure that you are using the right procedure, or if you don’t understand how to do it, it is essential to hire a professional.
There are essential tips that you can follow, which we are going to discuss in this post. These steps need to be taken seriously. If you want to install a window screen, some of the tools you need include:
- A roller knife
- Hack saw
- Utility knife
How to install window screen
Here are the steps you should take:
1. Remove Any Existing Window Screen
The first step you need to take when installing a new window screen is to remove any existing one. If you happen to have an existing one, open the window and remove it. However, there is the option of repairing the existing window screen and removing it from the frame and then re-screening it. You can also use a screen frame kit to build a new screen.
2. Repair the Screen
The second step is to repair the screen, and you can do this by measuring any tears and holes. If you have quarter-inch holes or less, you can patch them with a little nail polish dab, an adhesive like rubber, or clear glue.
Once you apply the glue and make sure that it has hardened, you will see that it creates a seal that helps prevent intruders. It is advised to make a patch if the hole is bigger. You can get the patch from anywhere, such as from an old window or door screen that you’re not using anymore.
3. Building the Frame
The third step of installing a window screen is building the frame. If you start from scratch or if you are replacing the entire screen, it is essential to have a screen kit. You can find them in different sizes, and this can significantly help make the process of screen installation quite faster.
You’ll find that most screen kits have the 4 sides of a frame, the corner pieces which connect the sides, and the spline, also known as the rubber cord that attaches the screen to the frame. You should ensure that you follow all the manufacturer’s instructions for assembly since they tend to differ.
4. Install the Screen
The fourth step involves screen installation. Use a nail or utility knife to pry out the end of the spline, and then grasp the end and pull it out slowly. Once you do that, remove the old screening if it’s a replacement.
In case the spline is good, you can also consider reusing it. But, it is highly recommended to replace a spline because it stretches when removing, which may interfere with how it fits.
The above steps are recommended if you are to install your window screen appropriately. You want to have a great fit that will last for a long time without any need for repairs.